CPD Training

In this CPD we explore what is an Air Handling Unit (AHU), the key applications where this type of system can be used. We provide an insight into the key advantages of an AHU and also the key components that make up a system along with additional accessories & options that can enhance the operation of a system. The final part of the CPD looks at the impact that a well designed and installed AHU can have on providing a healthy building.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

In this CPD we explore what is a Roof Top Unit (RTU), the key applications where this type of system can be used. We provide an insight into the key advantages of an RTU and also the key components that make up a system along with additional accessories & options that can enhance the operation of a system. The final part of the CPD looks at the impact that a well designed and installed AHU can have on providing a healthy building.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

In this CPD we explore what are the key legislations that are driving the design and application of Air Handling Units (AHU). The key elements of legislation that we take a deep look into during the CPD are EcoDesign Lot 6, Part L of the Building Regulations and ERP. We also discuss why good filtration helps support Indoor Air Quality (IAQ) in a building.

• Level: 3
• Credit: 1 hr
• Format: Event & webinar

In this CPD we explore what are the key legislations that are driving the design and application of Roof Top Units (RTU). The key elements of legislation that we take a deep look into during the CPD are EcoDesign Lot 21, Refrigerants and ERP. We also discuss why the application of RTU’s can support Healthy Buildings.

• Level: 3
• Credit: 1 hr
• Format: Event & webinar

In this CPD we discuss IAQ (Indoor Air Quality) and the myriad of factors that affect it. We look at recent guidance and how HVAC systems can be key contributors in the improvement of IAQ. In addition the course covers the potential new and existing product innovations to support the quest for cleaner indoor air.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

This CPD covers the latest updates relating to the F Gas regulations on the phase down of HFC refrigerants. In particular their impact on both manufacturers and installers on how they need to comply with the Directive with regards to use of refrigerants in Chiller systems. We discuss the use of different refrigerants and look at their impact on the Refrigerant phase down and the development of new low GWP refrigerants. We also review how this impacts the manufacturers of chiller systems and the considerations they need to take into account when developing new products using new low GWP refrigerants. In the final section of this CPD we look at the Eco Design Lot 21 Directive relating to the published energy efficiency of the all chiller equipment, detailing the guidance that all manufacturers need to follow to be able to publish their product energy efficiencies.

• Level: 2
• Credit: 0.5 hr
• Format: Event & webinar

In this CPD we look at some of the legislation and acronyms that are driving the market for chillers and heat pumps. This CPD provides background information explaining how chiller and heat pump efficiency is derived. The application of different compressors, heat recovery and free cooling is explained and how this can have an impact on energy efficiency. The F-Gas HFC phase down is also covered explaining GWP's and the market trend.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

This CPD is a high level look at Air Source Heat Pumps (ASHP), during the CPD we investigate the market drivers of why heat pumps used, the different types and how the operation of a heat pump. We give an introduction into the energy efficiencies & metrics of an ASHP and provide some example applications & system configurations of their use.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

This CPD is a high-level look at Water Source Heat Pumps (WSHP), during the CPD we investigate the market drivers of why heat pumps used, the different types and how the operation of a heat pump. We give an introduction into the energy efficiencies & metrics of an ASHP and provide some example applications & system configurations of their use.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

This CPD is a high level look at how to apply Air and Water Source Heat Pumps, we briefly recap on the key market drivers for the use of Heat Pumps, along with a description of an Air Source & Water Source Heat Pump and where they are used. The main part of this CPD explores the different applications and system configurations that can be used for both types of Heat Pumps (ASHP & WSHP) via the use of system schematics.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar

This CPD is a high-level look at the key regulations that apply to Air and Water Source Heat Pumps. We provide an insight into the key market drivers that are currently impacting the growth of the use of Heat Pumps. The main part of this CPD investigates the energy efficiencies of Heat Pumps and how this is calculated, and the impact of the latest Building Regulations has on the design and application of both Air Source and Water Source Heat Pumps.

• Level: 2
• Credit: 1 hr
• Format: Event & webinar